Thursday, July 10, 2014
TAMARISK IN THE WATER AND READY TO GO
Thursday, October 24, 2013
Introducing Tamarisk - 36' Cape George Cutter
Tamarisk is a 36’ Cape George Cutter with a rare center cockpit configuration. Owners Phil and Kae Hutchison bought hull #4 in 1973 and spent 5 ½ years finishing her, launching her in summer 1979. The owner’s two children (7 and 2 at time of launch) grew up sailing on the boat, and she has carried the family to many adventures over the past 35 years, cruising the northwest waters in Washington and British Columbia, from Olympia to Port Hardy, and around Vancouver Island. Like all Cape George boats, she has a very sturdily built hull, and handles beautifully in airs from light to heavy. Her owners have decided to move to power to extend their cruising life and provide more capacity for grandchildren, so are looking for a good home for their beloved boat. She is a cozy and comfortable craft that will keep you safe on your journeys, whether you are a beginning or experienced sailor. Tamarisk is currently dry-stored in Anacortes, WA. Owners Kae and Phil live in Seattle. Contact us at 209 276-8733 or 206 890-5144, or by email at kaehutchison@comcast.net.
Please browse through the pictures and specifications below. There are 14 posts in all. Engine information is in post #12 and also #14, Specifications. If you find yourself at the end of a page before you have seen all the posts, click on "Older Posts" at the bottom of the page to continue. The last post is "Specifications."
Boat Layout
The chain locker forward is followed by a 6’2” V-berth, with open shelf storage above and below each berth. Next aft to starboard is the head, with storage shelves behind; to port the hanging locker with a shelf on top.
Next aft is the main cabin. To starboard is a small shelf & drawer storage area followed by a settee with table that makes into a double berth, with book storage behind. On the aft starboard bulkhead is access to the wet hanging locker, which is located to starboard in the engine room. To port in the main cabin is first the navigation station chart table with a large drawer, chart storage and shelving below, along with a small shelf and radar above. Aft of the nav station is the U-shaped galley, with center-mounted diesel Dickenson stove forward, double SS sinks aft. On the side is generous counter space with under-counter storage bins in each corner, storage bins behind, together with a drawer and two storage bins under the counter mid-section. Custom-built storage for tableware is above the sinks and for silverware is to the left of the sinks.
Aft and up a 5-step ladder is the center cockpit, with U-shaped seating around the steering pedestal and storage lockers underneath the seating. Below the cockpit is the engine room, providing access to all parts of the engine. The cockpit has a removable floor to facilitate engine replacement. Batteries are located in the engine room, along with both fuel tanks.
Aft of the cockpit is a separate cabin with a double berth to port and storage to starboard. Aft of the aft cabin is a storage lazarette that also provides access to the steering ram.
Cockpit
Decks
Main Cabin - Starboard
Main Cabin - Port Side: Navigation Station
Wednesday, October 23, 2013
Main Cabin - Port Side: Galley
Head & Hanging Locker
Forward Cabin
Aft Cabin
Deck Gear & Sails
Engine & Engine Room
Tamarisk's engine is a fresh-water cooled Perkins 4108 engine, installed in 1996 (engine hours 2190). It has been well maintained by the owner, with a new head installed in 2010. At a cruising speed of 5 1/2 knots, Tamarisk burns approximately .7 gal/hr., making her very economical to motor in. With a 40 gallon fuel tank, she has a cruising range of over 50 miles. We supplement the built-in fuel tank with two 5 gallon fuel cans.
The engine room is located underneath the cockpit. Its placement allows good access to all parts of the engine. Access is through a door in the main cabin, located under the ladder. The cockpit floor can be removed if the engine needs to be replaced. In addition to the engine, the starboard side of the engine room holds a wet locker, reached through a door in the main cabin, and the main fuel tank. On the port side are the batteries, the 10 gallon fuel tank for the Dickenson stove and storage for extra lines, fenders and other large gear.
Below is the owner working in the engine room. Because Tamarisk has been used regularly, she has well-maintained mechanical and electrical systems along with her canvas, exterior fittings and interiors.
Keel and Rudder
Tamarisk Specifications
General LOA 36’ 0” + 6’ bowsprit. LWL 31’ 0”. Beam 10’ 6”. Draft 5’6”. Height 54’. Displacement 28,000 lbs. Headroom 6’ under main cabin beams. Designer: Cecil M. Lange. Builder: Hull – Cecil Lange (Hull #4, finished 1973); Remainder – Owner finished with professional assistance. Launched: 1979. Fuel: 40 G aluminum tank (for main motor); 10 G aluminum tank (for diesel stove). Water: 90 G in 3 bladder tanks. Holding tank: 6 G plastic tank.
Engine/Mechanical Engine: Perkins 4108, 40 hp continuous duty, fresh-water cooled; new head 2010. Engine hours: 2190 (Sept. 2013). Steering: Wagner hydraulic; center cockpit pedestal with wheel; emergency tiller. Drive: 1 ¼” SS shaft. Prop: 18 x 14 bronze fixed 3-blade. Fuel: Diesel; consumes approx. 0.7 G/hr at 5.7 knots cruising speed. Max speed: 7 knots. Alternator: Balmar alternator and smart charger. Spares: Starter motor. Head: Manual Raritan Marine Head.
Electrical/Electronics Batteries: 4 Trojan 240 amp 6 volt, series wired. Solar: 2 40-watt Kyocera solar panels; 3 30 watt Harris solar panel; solar controller. VHF: Icom 502. Radar: JRC 1500. Chart Plotter: Garmin 182C color chart plotter. Compass: Plastimo. Depth Sounder: SMR Bottom Trak Super Sounder. Stereo: Alpine CD, AM/FM. Clock: Seth Thomas Quartz Marine Clock. Bilge Pumps: Electric (1); Manual (1). Lights: Navigation. Controller: DC Panel with 4 DC accessory sockets.
Deck Gear Anchors: 35 lb. Galvanized Delta Plow on 50’ BBB chain linked to 400’ 5/8” 3-strand nylon rode; 22 lb. genuine galvanized Bruce on 30’ chain and 300’ ½” 3-strand nylon rode. Windlass: Lofrans Tigres electric w. manual backup. Wash Pump: Flowjet Wash-Down Pump w. deck fitting for hose.
Sails/Rigging Mainsail: Hood Slab Reefing w. 2 sets of reefing points. Headsail: 110% furling genoa; Harkin Furler, new 2013. Staysail: Buchan. Mast: Keel-stepped aluminum mast. Rigging: 5/16” SS rigging; Re-rigged 2004. Winches: 2 SS Barient #22 winches, 2 speed, on cabin top; 2 SS Barient #26 cockpit winches; 1 SS Barient #27 self-tailing mainsheet winch; 1 SS Barient #16 mast winch.
Accommodations: • 6’1” V berths in forward cabin. • 6’4” Double berth in aft cabin. • Main cabin settee with table can convert to double berth. • Nav station in main cabin, with pull-down chart storage in cockpit. • Galley has double SS sinks w. manual pump; Dickenson Pacific diesel stove and portable 2-burner propane stove. • Portable 45-quart dual voltage Engel Fridge/Freezer (No built-in refrigeration). • Rare center cockpit, completely enclosed; hard dodger tops forward and aft with removable canvas center top; new canvas forward half 2013; rear half replaced approx. 2009. • 3 brass kerosene lanterns (2 in main cabin; 1 in aft cabin).
Construction: Hull: Sturdy fiberglass w. full keel (CG Hull #4); gel coat finish; bottom taken down to gel coat & barrier coated in 2010. Deck: Fiberglass over 2 layers 3/8” Bruynzeel mahogany ply + ½” marine ply. Cabin top: Fiberglass over 2 layers 3/8” Bruynzeel ply; supported by 1 ½” x 3” laminated deck beams on 12” centers. Cabin sides: Fiberglass over 2 layers 3/8” marine ply; lined w. 5/8” tongue & groove cedar epoxyed to plywood. Bulkheads: 2 sheets ¾” exterior ply screwed and epoxyed together. Interior: Hull lined w. ¾” closed cell foam from waterline to deck; All cabins and bulkheads finished with 5/8” x 3 ¼” tongue & groove cedar.
